Lime A Way Thick Gel Formula Toilet Bowl Cleaner

Removes the toughest stains in seconds. Destroys lime; calcium; rust caused by hard water build-up. Lime-A-Way Toilet Bowl Cleaner: Thick formula coats and effectively covers bowl for that all around clean. Remains in contact with tough mineral stains longer for a deeper clean. Dissolves stubborn rust, calcium and lime stains - Even below the waterline. Leaves your toilet bowl completely clean, shiny and fresh smelling. Safe for plumbing and septic systems. Contains no phosphorus.

Read the entire label before using this product. To Open Child Resistant Cap: Hold bottle firmly with one hand on a flat surface. With other hand place your thumb and index finger on the ridged areas and squeeze sides of cap while turning counterclockwise. Avoid squeezing bottle when opening. Cap is not removable. To reseal, twist cap clockwise until tightly closed. To Clean Toilet Bowl Follow These Easy Steps: 1. First flush toilet and remove excess dirt and grime before cleaning. 2. Wet all surfaces of bowl interior, including sides of bowl and under the rim, with at least 4 oz. of Lime-A-Way Toilet Bowl Cleaner (squeeze bottle approximately 15 seconds). Replace cap securely. 3. Let soak for at least 10 minutes. Do not close toilet bowl lid. 4. Brush entire bowl thoroughly with a bowl brush and flush. 5. Rinse brush in fresh water after use. To Remove Tough Rust, Calcium & Lime Stains: 1. Apply a generous amount of Lime-A-Way Toilet Bowl Cleaner directly onto tough stains. For severe rust stains, if possible, remove water from bowl before applying liquid. 2. Let soak for 15 minutes. Do not close toilet bowl lid. 3. Follow cleaning steps No. 4 and No. 5 above. Repeat if necessary. Lime-A-Way Toilet Bowl Cleaner has been specially formulated for use only in toilet bowls. It should not be used or placed on toilet bowl lids, vanities, sinks, bathtubs, cabinets, countertops, rugs, etc. Clean up spills and drips immediately. Do not use with chlorine bleach or any other chemical products.