Gorilla

Gorilla Tough & Clear Mounting Tape

60"

$6.22 each

Out of stock

Aisle 24

Victoria H‑E‑B plus!

6106 N. NAVARRO

Description

Gorilla Tough & Clear Mounting Tape is a clear double sided tape that mounts in an instant, for a long-lasting, weatherproof bond. The crystal clear adhesive tape won’t yellow over time, and holds up to 15 pounds! Gorilla Tough & Clear Mounting Tape is perfect for indoor and outdoor projects and sticks to smooth and rough surfaces. Completing DIY projects is easy with this tough, double sided tape. Mount, build, and repair for a perfect finish, every time.

PRODUCT FEATURES

•15lb Strong Hold - Sticks to smooth and rough surfaces.

•Weatherproof - For indoor and outdoor use.

•Crystal Clear Adhesive - Won't yellow over time.

•Double Sided Tape - coated with adhesive on both sides for easy hanging.

•Bonds - Plastic, Metal, Wood, Glass, Brick, Ceramic, Stone & More!

Allergens and safety warnings
Important: This is a permanent tape and may cause damage or leave residue if removed. Not for use in applications where injury could result if mounted item fell.
Directions: Surfaces must be flat, dry and free of dirt and oil. Clean with isopropyl alcohol according to manufacturer’s instructions. Use 4 inch of tape per pound of weight. 1. Apply tape to back of object vertically, allowing for even distribution of weight. Avoid touching surface of tape. 2 Cut tape and press to secure tape to object. 3. Remove clear liner and align object to desired placement. 4. Press firmly 60 seconds as Gorilla Mounting Tape conforms to the surface and creates a strong, permanent bond. Tips for Use: Holding weight is based on objects with a maximum depth of 0.75 inch. Objects over 0.75 inch in depth put more stress on the bond and have an increased chance of failure. Tape must make contact with surface. If surface is uneven, tape will not be able to make contact & will not hold. Apply when temperature is above 50 degrees F. In-use temperature range: -40 degrees F to 248 degrees F. For easier liner removal - Pinch and stretch a corner of the adhesive until the liner lifts from the tape. Apply tape vertically. Object depth should not exceed 0.75 inch. Tape must make complete contact with surface.