The number of items in your shopping list has exceeded the maximum limit. Please remove some items, or create a new shopping list.
Oops. This product is only available in a minimum quantity of or more units
Roll over image to zoom in

Sylvania 500 Watt T3 Quartz Halogen

Product Description

500W T3 Quartz Halogen Lamp 2000 hour Life

Indoor/Outdoor Use

Preparation Instructions

Installation: Replace all equipment/fixture covers and shields after replacing bulb to prevent personal injury or property damage. Do not use if bulb is scratched, cracked or damaged in any way. To avoid damaging the glass, do not touch bulb with bare hands. (Hold with clean cloth or tissue when installing. If touched, wipe off fingerprints before lighting.) Make sure bulb is properly installed into socket to obtain good electrical contact and to avoid damaging bulb and/or socket. Socket condition may affect bulb life, replace socket if deterioration of socket or bulb contacts is observed.

Specification
Name Value
Power (W) 500
Type Halogen
Height 7.25
Width 0.60
Depth 2.80
Weight 0.035
Safety Warning
Fire Hazard: Do not use in torchieres or other indoor residential fixtures. Do not touch with bare hands. Do not use this 500 watt bulb in torchiere or other indoor residential fixtures. This bulb must be used in a fixture that has a suitable protective shield and/or screening technique to protect people and surroundings against the risk of personal injury and/or property damage from bulb shattering and UV exposure, since: 1. This bulb operates at high internal pressure and at high surface temperature and may unexpectedly shatter resulting in hot, flying fragments or glass or metal. 2. This bulb generates UV (ultraviolent) radiation that may cause skin and eye irritation with prolonged exposure. Safety Tips: To avoid risk of serious eye injury from the intense light, do not stare at operating bulb. To avoid the possibility of fire, do not operate bulb close to materials that are combustible or affected by heat or drying. To avoid electric shock, turn off power before attempting replacement. To avoid skin burns, wait for bulb to cool before handling. For safe and proper bulb operation, operate bulb at rated voltage and wattage. Operation above rated voltage increases UV output and internal pressure, thus increasing the risk of rupture: Use only in equipment/fixture specifying this bulb type. Do not move, bump or bounce equipment/fixture during operation because mechanical shock can cause shattering and failure of the bulb. Operate bulb only in a horizontal position.
Actual product packaging and materials may contain more or different information than that shown on our website. You should not rely solely on the information presented here. Always read labels, warnings and directions before using or consuming a product. View full Product Information Disclaimer
Quantity

Reviews

Tell us what you think!
Tell us what you think!
Be the first to write a review!
Wondering what to say?
  • Include usage tips, key benefits, and helpful suggestions.
  • Did you have a good or bad experience?
  • Would you recommend this to friends or family?
  • Be respectful to others.
{{review.commentTitle}} {{review.timestampFormatted}}
{{review.commentText}}
by {{review.sender.screenName}} {{review.sender.screenName ? review.sender.screenName : 'Anonymous'}}
Was this review helpful to you? Yes {{review.posVotes}} No {{review.negVotes}} Flag
{{reply.commentTitle}}
Customer Relations
{{reply.timestampFormatted}}
{{reply.commentText}}