The number of items in your shopping list has exceeded the maximum limit. Please remove some items, or create a new shopping list.
Oops. This product is only available in a minimum quantity of or more units
Roll over image to zoom in

Loctite Ultra Extreme Conditions Stik'n Seal

Item is no longer available.
Product Description

All temperature. Hard & soft materials, water, UV, vibration & impact resistant, low odor & acid free. Advanced repair - Revolutionary flextec formulation bonds more surfaces faster than ordinary household adhesives. Final bond withstands all conditions, both indoor and out. Final bond is inert and safe once fully dry. Technical Data: Open time: 5 minutes. Cure Time: 24 hours. Cure times will increase with lower temperature, humidity and if bonding two non porous surfaces. Cured Form: Transparent, non-flammable, flexible solid. Shear Strength 758 psi (7 days Beech to Beech). Application Temp: 41 degrees F - 104 degrees F (5 degrees C - 40 degrees C). Withstands: -58 degrees F - 248 degrees F (-50 degrees C - 120 degrees C). Not recommended for: Metal-to-metal. Rubber. Hard to bond plastics such as PE, PP, PTFE, or applications with constant water immersion. Made in Germany.

Preparation Instructions

Preparation: Protect work area. Surfaces must be clean and free from grease. For improved adhesion, roughen very smooth surfaces. Adhesive application: Apply adhesive to one surface to be repaired. Position and press parts firmly together within 5 minutes of application. Leave bond undisturbed for at least 1 hour. Clean-Up: Uncured: Mineral spirits. Cured: Carefully cut away using sharp-edged tool.

Specification
Name Value
Height 0.85
Width 3.75
Depth 7.90
Weight 0.085
Safety Warning
Contains trimethoxyvinylsilane and amines. May be harmful if directly inhaled or swallowed. Methanol is released during application and cure, which may cause dizziness, headache or nausea. Use only in well ventilated areas. Avoid eye and skin contact prolonged or repeated skin contact may cause sensitization. Persons with previous allergic reactions to amines should avoid contact with product wash hands after using. Wear gloves when applying product. First Aid: For eye contact flush with water for 15 minutes. Call a physician if irritation develops and persists. For skin contact, wash affected area with soap and water immediately. If affected by inhalation, remove to fresh air and get medical attention. If ingested, do not induce vomiting. Call a physician or poison control center immediately. Do not take internally. Keep out of reach of children.
Actual product packaging and materials may contain more or different information than that shown on our website. You should not rely solely on the information presented here. Always read labels, warnings and directions before using or consuming a product. View full Product Information Disclaimer

Reviews

Tell us what you think!
Tell us what you think!
Be the first to write a review!
Wondering what to say?
  • Include usage tips, key benefits, and helpful suggestions.
  • Did you have a good or bad experience?
  • Would you recommend this to friends or family?
  • Be respectful to others.
{{review.commentTitle}} {{review.timestampFormatted}}
{{review.commentText}}
by {{review.sender.screenName}} {{review.sender.screenName ? review.sender.screenName : 'Anonymous'}}
Was this review helpful to you? Yes {{review.posVotes}} No {{review.negVotes}} Flag
{{reply.commentTitle}}
Customer Relations
{{reply.timestampFormatted}}
{{reply.commentText}}