The number of items in your shopping list has exceeded the maximum limit. Please remove some items, or create a new shopping list.
Oops. This product is only available in a minimum quantity of or more units
Roll over image to zoom in

Loctite Instant Mix Epoxy

Item is no longer available.
Product Description

Self mixing & precise application. 3200 PSI. Metal, wood, ceramic, stone, glass, tile & most plastics. A high-strength 2-part adhesive in an easy to use applicator. Final bond is high strength and weather, water and solvent resistant Fills voids and bonds uneven surfaces. Technical Data: Leave Undisturbed for: 20 minutes; Full Strength: 24 hours 3200 psi on steel; Cured from: translucent yellow solid; Application: 39 degrees F (4 degrees C) to 95 degrees F (35 degrees C). Withstands: -10 degrees F (-23 degrees C) to 120 degrees F (49 degrees C). Not Recommended for: PE, PP, non-stick coatings, nylon products, flexible materials, prolonged immersion in water or potable water systems. Made in China.

Preparation Instructions

Surface Preparation - Protect work area. Surfaces should be clean, dry and tree of grease and oil. Roughen smooth surfaces for better adhesion. To Open and Dispense: 1. Hold syringe with nozzle end up and pull back slightly on plunger, allowing air bubbles to rise to top. 2. Snap cap off by pushing to the side. Do not twist. 3. Attach nozzle over syringe opening, push past prongs, and turn 90 degrees to lock in place. 4. Depress plunger to dispense epoxy directly onto one side of the surfaces to be bonded. Bonding - Join surfaces within 4 minutes of adhesive application. Immediately remove excess glue with mineral spirits or rubbing alcohol (follow the solvent manufacturer's instructions). The bond sets in 5-7 min. and achieves usable strength in 20 min. Closure - Remove and discard nozzle. Retract plunger slightly and wipe syringe tip. Remove cap from side holder and place on end of syringe.

Specification
Name Value
Depth 1.10
Height 9.00
Weight 1.76
Width 3.75
Safety Warning
Danger: Contains epoxy resin, polymercaptan and amine curing agents. Do not get in eyes or on skin. Do not breathe vapors. First Aid: For eye contact, flush with water for 15 minutes, call a physician. For skin contact, wash thoroughly with soap and water, call a physician if symptoms persist. If swallowed, do not induce vomiting, call a physician. Keep out of the reach of children.
Actual product packaging and materials may contain more or different information than that shown on our website. You should not rely solely on the information presented here. Always read labels, warnings and directions before using or consuming a product. View full Product Information Disclaimer

Reviews

Tell us what you think!
Tell us what you think!
Be the first to write a review!
Wondering what to say?
  • Include usage tips, key benefits, and helpful suggestions.
  • Did you have a good or bad experience?
  • Would you recommend this to friends or family?
  • Be respectful to others.
{{review.commentTitle}} {{review.timestampFormatted}}
{{review.commentText}}
by {{review.sender.screenName}} {{review.sender.screenName ? review.sender.screenName : 'Anonymous'}}
Was this review helpful to you? Yes {{review.posVotes}} No {{review.negVotes}} Flag
{{reply.commentTitle}}
Customer Relations
{{reply.timestampFormatted}}
{{reply.commentText}}