Loctite All Purpose Clear Power Grab Adhesive

The Loctite Power Grab is an invisible formula that delivers fast, effective results. Loctite Power Grab holds instantly without nails or bracing. Goes on white, dries clear. Invisible formula delivers fast, clear, flawless results.

Recommended for: Molding. Wall paneling. Chair rails. Foam board. Cork. Concrete base boards. Plaster. Ceramic. Drywall. Brick. Metal. Application: surfaces must be clean, dry and free of foreign materials. Adhesive and materials must be above 50 degrees F (10 degrees C) during application and curing. Required adhesive varies with surface texture/area and the weight of the item to be bonded. At least one surface must be porous. If the non-porous surface is glossy, sand to remove gloss and remove residue. Extremely heavy or distorted materials and glossy surfaces will need support until dry. Once the product is applied, you have 15 minutes to arrange or change the position of the substrate. Clean up: clean adhesive with soap and water before dry. General: Power Grab® dries in approximately 24 hours. Wipe excess from skin, clothing and other surfaces before the product hardens. Do not use Power Grab® in permanently damp or wet areas. Not suitable for bonding mirrors. Use product in accordance with the instructions. Protect from freezing. 1. 2. 10 sec. 3. 24h.