The number of items in your shopping list has exceeded the maximum limit. Please remove some items, or create a new shopping list.
Oops. This product is only available in a minimum quantity of or more units
Roll over image to zoom in

Gorilla Weld Tubes

Product Description

GorillaWeld is an incredibly strong, heavy duty two part adhesive. The tough, steel bond epoxy formula has a 4250 PSI bond strength and sets in just 10 minutes. GorillaWeld is waterproof and versatile, creating a long lasting, permanent bond to: metal, plastics*, concrete, ceramics, PVC, fiberglass and more!

Preparation Instructions

All surfaces should be clean and free of debris. To improve adhesion, roughen smooth surfaces with sandpaper before gluing. 1. Remove cap from each tube and use top of cap to puncture foil seal. 2. Dispense equal parts from each tube onto a clean, disposable surface. 3. Mix with disposable mixing tool for approximately 20 seconds until color is uniform. 4. Apply to surface within 3 minutes. 5. Clamp surfaces together and leave undisputed for 10 to 40 minutes. Full cure in 24 hours. Cure time dependent on temperature, humidity and quantity applied. Set Time: 10 minutes. Cure Time: Full cure in 24 hours for load bearing weight. Application in cooler temperatures may cause longer cure times. Temperature Range: Bond withstands -40 degrees F to 300 degrees F. Cured Color: Dark Grey. Clean Up: Remove excess wet glue with a dry cloth and acetone or mineral spirits following solvent manufacturer's recommendations. Usage: Use in a well ventilated area. Storage: After use, replace cap tightly on each tube. Store in a cool, dry place. Store away from children and animals.

Specification
Name Value
Height 7.95
Width 4.90
Depth 0.75
Weight 1.84
Safety Warning
Hardener: Flammable. Irritant. Resin: Danger: harmful by skin absorption. Corrosive. Flammable. Store away from children and animals. Read cautions on back panel. Danger: Harmful by skin absorption. Corrosive. Flammable. Irritant. Do not swallow. Do not get in eyes or on skin or clothing. Do not use near heat, sparks, flames or while smoking. Handle with care. Keep out of reach of children. Wear safety glasses and chemical resistant gloves. Use only in a well-ventilated area. Hardener contains methyl methacrylate, styrene-methyl methacrylate-butadiene polymer, and 3,5-diethyl-1,2-dihydro-1-phenyl-2-propylpyridine. Resin contains methyl methacrylate, Methacrylic acid, and styrene-methyl methacrylate-butadiene polymer. First Aid Treatment: If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with soap and water. If on clothes, remove clothes. If breathed in, move person into fresh air. For medical emergencies only, call 800-420-7186. Cancer and reproductive harm - www.P65Warnings.ca.gov.
Actual product packaging and materials may contain more or different information than that shown on our website. You should not rely solely on the information presented here. Always read labels, warnings and directions before using or consuming a product. View full Product Information Disclaimer
Quantity

Reviews

Tell us what you think!
Tell us what you think!
Be the first to write a review!
Wondering what to say?
  • Include usage tips, key benefits, and helpful suggestions.
  • Did you have a good or bad experience?
  • Would you recommend this to friends or family?
  • Be respectful to others.
{{review.commentTitle}} {{review.timestampFormatted}}
{{review.commentText}}
by {{review.sender.screenName}} {{review.sender.screenName ? review.sender.screenName : 'Anonymous'}}
Was this review helpful to you? Yes {{review.posVotes}} No {{review.negVotes}} Flag
{{reply.commentTitle}}
Customer Relations
{{reply.timestampFormatted}}
{{reply.commentText}}