The number of items in your shopping list has exceeded the maximum limit. Please remove some items, or create a new shopping list.
Oops. This product is only available in a minimum quantity of or more units
Roll over image to zoom in

Flex Seal Liquid Rubber Sealant Coating

Item is no longer available.
Product Description

Liquid rubber in a can. As Seen on TV. Stop leaks. Seals & protects. Covers easily. Excellent for: roof leaks; gutters; skylights; windowsills; flashings; duct work; foundations; awnings; chimneys; downspouts; vent pipes; A/C; drip pans; RVs; campers; trailers; projects; crafts; hobbies and so much more! Flex Seal is an easy to use rubberized coating that sprays out as a liquid, seeps into cracks and holes and dries to a watertight. flexible coating. Flex Seal seals out water. air and moisture and helps prevent rust and corrosion. Once dry, Flex Seal can be painted over. Flex Seal is the easy way to coat, seal, protect and stop leaks fast! Contains no CFCs which deplete the ozone layer. To reorder please visit www.flexsealproducts.com. Made in the USA.

Preparation Instructions

So easy to use! Read entire can. Wear face and eye, protection, protective gloves and clothing. Make sure the area is clean, dry and free of grease, oil and dirt. Shake well: Spray 8 inches to 12 inches from surface using an even sweeping motion. Apply several even coats until all cracks and holes have been filled. Allow 24 to 48 hours to dry before applying another coat. Fully cures in 48 hours. Hint: Make sure Flex Seal has filled all cracks and holes and is fully cured before testing product. If light passes through apply additional coats. Use only in a well ventilated area. When using inside, prevent vapor buildup by opening doors and windows. Ensure fresh air entry during application, and drying. Do not use near heat, sparks, pilot lights or other sources of ignition. Do not smoke. When covering large areas indoors, eliminate Ignition sources far from the point of use because vapors are heavier than air and may travel significant distances. When applying to large, areas indoors, do not exceed use of 1/2 of a can before allowing one hour for the coating to dry and vapors to dissipate before using again. Works best at can temperatures above 60 degrees F. Shake can throughout application. Note: After each use, invert can and apply a short burst to clear nozzle. Not intended for use by Professional Roofers. This product has not been tested for use in potable water systems. May not be compatible with all plastics and rubbers.

Specification
Name Value
Type Sealant
Height 9.30
Width 1.80
Depth 1.70
Weight 1.15
Safety Warning
This product can expose you to chemicals including Ethyl Benzene and Carbon Black, which are known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Keep out of reach of children. Danger: Extremely flammable. Harmful or fatal if swallowed. Vapor harmful. May cause eye, skin, and respiratory tract irritation. Contents under pressure. See other cautions on back panel. Keep out of reach of children. Danger: Contains Toluene (108-88-3), Odorless Mineral Spirits (64742-48-9), Aliphatic Petroleum Solvent (64742-89-8), Calcium Carbonate (1317-65-3), Carbon Black (1333-B6-4) and Liquefied Petroleum Gas (68476-86-8). Use only in a well ventilated area. When using inside, prevent vapor buildup by opening doors and windows. Ensure fresh air entry during application and drying. Do not use near heat, sparks, pilot lights or other sources of ignition. Do not smoke. When covering large areas indoors eliminate ignition sources far from the point of use because vapors are heavier than air and may travel significant distances. Intentional misuse by concentrating and inhaling the product can be harmful or fatal. Avoid contact with eyes or prolonged contact with skin. Do not puncture or incinerate, container. Do not expose to heat or store at temperatures above 120 degrees F. First Aid: if Eye Contact: Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open. Remove contact lenses, if present and easy to do. If irritation persists get medical attention immediately. If Skin Contact: Wash with soap and water. If irritation persists seek medical attention. Excessive Inhalation: Remove to fresh air. Seek medical attention immediately. If breathing stops give artificial, respiration. If Ingested: Do not induce vomiting, Seek medical attention immediately. 24 Hour Medical Emergency: 1-866-836-8855.
Actual product packaging and materials may contain more or different information than that shown on our website. You should not rely solely on the information presented here. Always read labels, warnings and directions before using or consuming a product. View full Product Information Disclaimer

Reviews

Tell us what you think!
Tell us what you think!
Be the first to write a review!
Wondering what to say?
  • Include usage tips, key benefits, and helpful suggestions.
  • Did you have a good or bad experience?
  • Would you recommend this to friends or family?
  • Be respectful to others.
{{review.commentTitle}} {{review.timestampFormatted}}
{{review.commentText}}
by {{review.sender.screenName}} {{review.sender.screenName ? review.sender.screenName : 'Anonymous'}}
Was this review helpful to you? Yes {{review.posVotes}} No {{review.negVotes}} Flag
{{reply.commentTitle}}
Customer Relations
{{reply.timestampFormatted}}
{{reply.commentText}}