Item added to "My List"
You are now leaving In-Store. Your In-Store order will be waiting for you when you're ready to check out.
You are now leaving Ship-to-Home. Your Ship-to-Home order will be waiting for you when you're ready to check out.
You are now leaving Curbside & Delivery. Your Curbside or Delivery order will be waiting for you when you’re ready to check out.
For use on trucks, SUVs, vans and 4x4s. Tire sensor safe! Seals in minutes. Just connect, inflate and go! Non-flammable formula. Specially designed for trucks, SUVs, vans, 4x4s. No jacks or tools required. Seals and inflates in minutes. Non-flammable formula. Patented proprietary rubber compound provides an emergency seal on contact. Do not use in bicycle, high performance, Z-rated or motorcycle tires. Made in USA.
Wear protective eye wear during use (safety goggles, eyeglasses, sunglasses, etc). If temperature is below 32 degrees F, warm can using vehicle's interior heater vent before use. 1. If possible, move car slightly so that the tire valve is in the 4 o'clock to 8 o'clock position. 2. Shake can vigorously for 30 seconds before attaching hose to tire. remove cap, unwind hose and tightly screw nozzle clockwise onto tire valve. 3. Hold can upright and push button down firmly. Product will be activated automatically. Do not shake can while hose is attached to valve stem to avoid hose breakage, which might cause contents to spray eyes, clothing or vehicle. 4. Only when product stops moving through the clear hose, release button. Then unscrew hose. 5. Make sure tire rim lifts off the ground. 6. Only if rim is off the ground, drive vehicle immediately a short distance (2 to 4 miles) to allow tire pressure to increase and sealant to spread evenly inside the tire. 7. If needed, add air up to manufacturer recommended pressure. 8. Have tire repaired by tire professional at the earliest opportunity.
Sign up to receive exclusive email-only savings and information.