Command Damage-Free Hanging Medium Hooks Clear

Forget about nails, screws and tacks, Command Clear Hooks are fast and easy to hang! The revolutionary Command Clear Adhesive Strip adhere firmly to many surfaces, including paint, wood, tile and more. Yet, come off leaving no holes, marks, or sticky residue. Command Clear Hooks and Strips blend in seamlessly allowing you to show what matters most, your decor, not how it's hung up. Rehanging them is as easy as applying a Command Clear Refill Strip, so you can take down, move and reuse them again and again!

To apply. 1. Clean surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips. 2. Blue side. Remove blue liner. Press adhesive to hook. Make sure tab is accessible for future removal. 3. Black side. Remove black liner. 4. 30 Seconds. Press hook firmly for 30 seconds. Wait 1 hour before use. To remove: 1. Never pull strip towards you. 2. Straight down. Hold hook gently to prevent hook from snapping fingers. Do not press hook against wall. 3. 12" 30cm. Stretch straight down along wall at least 12 inches (30 cm) until strip releases from wall. Important: failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit command.com. Note: apply to surfaces above 50 degrees F (10 degrees C). Adhesive could lose adhesion above 105 degrees F (40 degrees C).